Concrete Hardener

Hardening and waterproofing agent for concrete

The adhesive composition – LUX-M Hardener C finish coat – is an impregnating agent based on hydrated silicate and modified acrylics. Its another name is a concrete waterproofing agent. LUX-M Hardener C impregnating agent increases the rated strength and water resistance class of the concrete surface.

The concrete primer may be applied on both floors and walls of freshly-laid or old foundations.

Scope of application of LUX-M Hardener C impregnating agent

• It is applicable in civil and military construction, for reinforcing protective shelters and defence installations, for waterproofing concrete surfaces in air-raid shelters, metro stations, warehouses, underground parking lots, hiding places, basements, etc.
• Also, this agent may be applied in major road, residential and agricultural construction, including locations with increased traffic load, such as airports, concrete bridges, tunnels, roads, piers, berths, parking lots, car washes and other industrial and household premises.
• One may use it in the final stage of concrete and stone polishing.
• It is suitable for making an intermediate coating before further application of finishing materials of any kind.

Advantages of LUX-M Hardener impregnating agent

• High concentration of the main components, which ensures reliable protection of concrete from soaking with water.
• This concrete primer is multi-purpose, so it may be used both outdoors and inside the premises and structures.
• It is compatible with most dry topping hardeners.
• The concrete waterproofing agent is completely ready for use, there is no need to dilute it with water.

Recommendations for the use of the waterproofing agent

Apply it at temperatures ranging from +5°C to +30°C. Do not apply it if it is going to rain.

Mind to apply it on a clean concrete base only, with no bleed water and preliminary treatment of the surface with primers and paints. Do not apply it onto immature concrete, wait for 1-2 weeks to make it harden up. You may apply the concrete primer on the foundation that has been previously treated with a hardening agent.

Before applying the agent, make sure that you have all the necessary supplies and tools at hand, such as a microfiber mop, a spray gun and a sanding machine.

Prepare the floor surface before applying the waterproofing agent. For this purpose, remove the loose layer of concrete, seal up all dints and cracks, and treat the base with a sanding machine. The treatment must be at least 1.5 mm deep.

Before applying the hardener, you have to vacuum the concrete surface and wash it up with a liquid detergent (with 7+ pH). Next, mop the surface and leave it to dry up.

Before use, properly shake the container.

Apply an even layer of the agent to the floor surface. Make sure to properly impregnate the surface with the agent. We recommend to use a microfiber mop for the best agent's application. There should be no puddles left. Apply several layers of the concrete primer, but mind to apply the next layer only provided the previous layer is no longer sticky and properly dried-up. We recommend to apply the second layer an hour after the first application, with the third layer applied in two hours after the previous layer's application.

Mind that the corrosion activity of the hardener's composition is pH˃10, so, in order to prevent etching, glass and metal surfaces must be properly protected.

There should be no dry areas left on the treated surface. If necessary, you should keep on moistening the surface within 45 minutes. In an hour after the start of treatment, remove all the agent's remains (if any) from the surface with a soft scraper. If the surface is too porous, treat it once again in 12-15 hours.

Technical characteristics and properties of the Hardener C concrete impregnating agent for outdoor and indoor use

• It is an opaline homogeneous liquid, with no visible suspended particles.
• The impregnating agent is non-flammable, since it is water-based.
• The liquid product is corrosive.
• Toxicity: waterproofing agent for concrete may cause eye and skin irritation. Avoid contact with eyes, skin or clothing.

The cost of Hardener C impregnating agent

You can buy Hardener C impregnating agent wholesale and by retail (from 10 kg) directly from its manufacturer, LUX-X company.

How to buy Hardener C impregnating agent?

If you are interested in the suggested product, you can buy this waterproofing agent in our company, just contact our managers. You may contact us by phone (you will find contact information on the page) or via the feedback button – click it and enter your details in the online form, and the Lux-X specialists will call you back asap.

Advantages of cooperating with us:

• we ensure the quality of our concrete waterproofing agent, since we use raw materials from approved suppliers and reliable equipment in the production process;
• consulting with our specialists – they will tell you in detail about the technical characteristics, application of the impregnating agent, and its storage conditions;
• delivery throughout Ukraine – we work with many freight forwarders and ship our goods to any locality of our country.

Our concrete waterproofing agent has the appropriate certificates issued to confirm its quality. We cooperate with wholesale and retail customers. Please contact our specialists to discuss the details of further cooperation.